How to Fix Canon Pixma MX432 Printer Error Code 5100?

Fix Canon Pixma MX432 Printer Error Code 5100

If there is an important document that you need to print immediately but instead of printing a copy of the document, the printer will show the Canon Pixma MX432 Printer Error Code 5100. If such an error happens in front of you, it can be very frustrating as this will create an obstacle to your printing experience.

If you want to solve the Canon Printer Error Code 5100 problem, then reading this article will solve this problem. In addition, the expert team can be contacted to get rid of Canon Pixma MX432 Printer Error Code 5100 issue. All you have to do is get in contact with Canon’s toll-free customer service number and get in touch with our technical support team.

There may be several contributing factors for this Canon Pixma MX432 Printer Error Code 5100 issue’s occurrence. These are the following reasons:

1.   There’s a risk that the printer material’s protective layer could prevent the printhead from moving properly.

2. One of the possibilities is also paper jam.

3. It may occur due to the dust on the face of the cartridge.

4. It may be because the ink tank is improperly mounted.

5. Canon printer needs resetting.

Canon Printer Error Code 5100 can be solved through a variety of solutions. So, let’s read one by one all the solutions.

Step 1: Cutting off the Printer Head of Protective Material

1. Open the Canon printer’s top cover.

2. Start searching for and removing the protective material.

3. Open the cover and click the printer on.

4. Now, you need to see that the 5100 problem of printer error code has been patched.

Step 2: Take your Canon Printer’s Jammed Paper

1.  Turn off your printer first of all.

2. You need to remove the paper from the tray gently and correctly.

3. Open the printer head now and then power your printer.

4. You are required to check in the final step whether or not Canon Pixma MX432 Printer Error Code 5100 problem is solved.

Step 3: Mount the Ink Tank

Sometimes the Error 5100 occurs because the Canon Pixma MX432 Printer’s ink is not correctly installed. This may cause obstructions in the working of the print head. You are needed to reset or reinstall the ink cartridge to solve this problem.

To do this, you should remove all the ink tanks from your printer and start cleaning them with the use of filtered air or compressed air blower. Nonetheless, you need some technical knowledge to do this. Through dialing number and getting immediate and thorough assistance, you can also meet the specialists at any time.

Step 4: Seek to reset your MX432 Canon Pixma Printer

1.   Turn off and remove the canon printer from a power source.

2. Now, to restore power, press the power button.

3. Click the power button and click the resume button twice at the same time.

4. Leave the power button now and test whether or not the problem is solved.

You can solve the Canon Printer Error 5100 by following any of the above 4 methods. If you can’t solve this problem yet, you can contact the Canon support team and they will help you solve this problem. You can solve this problem according to your own convenience. If you need help immediately, dial the number of the customer service now.

If you are unable to Fix Canon Pixma MX432 Printer Error Code 5100, just dial +1-844-200-2814 to Fix Canon Printer Error Code 5100 and Fix Error Code 5100 in Canon Pixma MX432 .