How To Guide For Canon mp495 Wifi Setup?

Canon mp495 Wifi Setup

Canon mp495 Wifi Setup: Canon is a well-known brand that produces high-quality printers and other electronic devices. A cloud print and scan service are included with all Canon printers. Users can easily print from a computer, laptop, or smartphone using these features. If you want to take advantage of these fantastic features, you must first understand the Canon Pixma mp495 Wireless Setup procedures.

How to Setup Wifi on Canon mp495?

In just a few steps, you can figure out How to setup Wifi Printer Canon mp495. Wireless printing allows you to print from virtually any location, including your office or home. Are you looking for a professional guide as well? With us, you can put an end to your search.

This article will show you how to set up your Canon router in the most amazing way possible. Though the setup process is simple, it can be a little tricky at times. As a result, you must follow the steps exactly as they are written below.

Methods For Canon mp495 wireless setup mac

The first step in finishing a printing job on a Mac is to register the device with the printer. The printer can use the setup process to connect the devices for a smooth interface. In this section, you will also find the practical methods. So, take a close look at the entire article and come up with your own solution to the problem.

Register For Canon mp495 Wireless Setup Manual

To register your Canon printer with your computer, you must first determine whether the printer has an active internet connection. You can also enable the “Auto connect” option, which will automatically detect the system software. After that, download the Utility to your computer and wait for it to complete the installation process. If the program does not run automatically, you must run it manually. After that, select your printer model number and press the Next button. Then, for the Next icon, go to the printer registration and select it.

Canon mp495 Wifi Setup

A new window will appear on your computer, asking you to confirm your commitment to the license. Go over the instructions that are shown on the computer now. Simply push the OK button. It’s likely that you’ll be asked to print a page. At that point, you must select the Yes button to complete the procedure. Additionally, you can use the installation wizard to build a new account. You can fill out the form with the requested details and then press the Finish button. If you’re trying to register a new product, select “I already have an account.” Fill out the “Add a new printer form” and then select Add. In the final step, choose the Enter button and check if you are able to print a paper or not.

How to Setup Canon Pixma mp495 Wireless?

Before continuing with these steps, you should be informed of certain terms and conditions that must be met in order to create a WPS link. You must ensure that the WPA or WPA2 security protocol is being used. It is needed to verify that the access point has a physical WPS key. After you’ve completed the verification, follow the steps listed below.

  • The first and foremost thing you have to do is to switch on your printer.
  • After that, tap and hold the Maintainance key from alongside your printer for almost about five seconds.
  • When the LED starts to blink then press the “Fit to page” key.
  • Now, tap on the WPS key on your access point for about two minutes.
  • You can see that the LED lights are flashing for three seconds. By any chance, if you notice an error code on the display then tap on the black key to decline the error.

Canon mp495 Network Setup

This method helps you to confirm that your Canon printer is connected successfully to your wireless network:

  1. Be sure that your Canon printer is switched on.
  2. Put an A4 size sheet in the paper tray.
  3. After that, you have to press the Maintenance button a few times until the LED lights appear on the screen.
  4. Now, tap on the Black key. Then, verify that the Link Status option is in an active condition. And check the SSID as well. It will mark the proper name of your network.
  5. Now, it’s time to download the software to make the most out of your Canon printer.

Related Blog- Setup Canon Pixma MP495 Printer to WiFi

Canon Pixma mp495 Setup Download for Mobile

If you desired to print documents that are present on your mobile then you have to follow these steps exactly the same:

  • The very first thing that you have to do is to be sure that your Canon printer is connected with stable internet connectivity. If not, then find a stable connection proceed with the next steps.
  • After connecting a proper connection go to the default browser on your mobile device.
  • Then, navigate to the search box and type “HTTP://” and then type the IP address of your Canon printer. If you don’t know the IP address, then you can check it by clicking on Control Panel. Printers web setup page will appear n the screen.
  • After that, navigate to the Firmware Update icon and click on it. Now, go through the instructions displayed on the screen.
  • If you are a new user then you must create a user account from your PC. But, if you already have an account then choose the “Canon Connect Services line.”
  • Now, follow the instructions to complete the setup process. After completing the processes click on Finish and finally verify whether you have completed the setup process or not.

To Wrap Up For Canon Pixma mp495 Wifi Setup:

Hopefully, the above methods will assist you in completing the Canon Pixma mp495 Setup Without CD procedure. However, if you experience any difficulties, you are welcome to contact us. It is really important that you leave your valuable feedback in the feedback box. If you are having any other problems, you can seek clinical assistance as soon as possible.

It’s important to note that you’ll need a secure internet connection to finish the setup. Furthermore, the auto-update button should always be activated. This will assist you in downloading the most recent update of the app you need.

How to Setup Canon Pixma mx472 Wireless Printer?

Canon mx472 Setup Wireless

Canon MX472 is one of the best printers and thus being used by a number of people in this global market. Canon is a quite well-known company because it has the capability of providing the best customer satisfaction. If you have recently purchased this Canon MX472  printer model and want to use it, then you must know the procedures for How to Setup Canon Pixma mx472 Wireless Printer?. The setup process is very easy and as well as simple too.

So, if you are looking for the perfect solutions, then you are in the right place to get rid of any problems while setting up your printer. It is recommended that you have to follow the steps exactly the same as mentioned below. It is advised not to skip any step or make any mistake while performing the methods.

How to Setup Canon Pixma mx472 Wireless Printer

How do I Setup my Canon mx472 Wireless Printer?

You may find several methods for Canon mx472 Manual Wireless Setup. Here in this guide, we are going to illustrate some effective methods that can help you to complete the setup process as soon as possible. Let’s start:

Step 1: Canon mx472 Connect to Wifi

How to setup Canon Pixma mx472 Wireless Printer? It is very simple and easy too. You just need to go through the steps and set up your printer soon.

  • The first thing you have to do is to tap on the Power key and switch on your printer.
  • After that, tap on the Settings button that is located alongside your device.
  • Now, click on the arrow and navigate to the Device Settings. Then, choose the OK option and tap on it.
  • Thereafter, select the arrow key and move to the LAN settings option and again press the OK button.
  • Now, with the help of a pointer locate Wireless LAN settings and choose OK. You can see that the printer will start searching for the WiFi network and the LED light will start to blink.
  • By any chance, if you find the searching process is taking too long, then tap on the Stop icon and navigate to the Wireless LAN Setup and Standard Setup.
  • Tap on the OK button. Now, you may prompt to give the password of the WiFi and choose OK.
  • At the final stage, click on OK, and the screen will display Connected.

Step 2: Canon mx472 Wireless Setup Window to Printer

If you follow these steps, then you will surely connect your Canon printer with the wireless network. Furthermore, by this WPS method, you can configure your printer without any hassle. Thus, follow these steps carefully and execute them exactly the same as we are going to discuss in this section:

  • At first, you have to do is to make sure that your Canon printer and the router both support the WPS feature. Otherwise, this process will not relevant to you.
  • Then, press on and hold the WPS key on your Canon printer for more than ten seconds. Next, you will receive a message that indicates the WPS mode is running on your device.
  • Next, you have to tap on and hold the WPS key on your router.  After completing the process, wait for a few minutes while both of the devices get connected.
  • Finally, try to print a settings report. Check if your Canon printer has successfully connected with your wireless network or not.

Related Blog- Error Code 5100 Canon MX472 Printer

Step 3: Canon mx472 Wifi Setup for PC

You might have to add your printer to your computer to complete the printing job. Here we illustrate some awesome fixes to attach your printer to your computer. Let’s start:

  1. The very first thing you have to do is to, tap on the Windows key and R at the same time on the keyboard.
  2. After that, you have to copy and paste the name that is Microsoft. devices and printers in the blank box.
  3. Now, click on the OK option and navigate to the “Add a Printer”.
  4. Finally, you have to follow the instructions that are shown on the screen. By this process, you can attach your printer to your computer successfully.
  5. Now, you can try to print a page and verify if you are able to print or not.

To Conclude

Expectedly by executing the mentioned below methods for How to Setup Canon mx472 Wireless Printer?. But in any case, if you are unable to do so, then let us know your queries. Give your valuable feedback in the below box and we will rectify it at the earliest possible.

Canon MG3500 Scanner Setup

Canon MG3500 Scanner Setup

Canon MG3500 is an All-in-one printer from Canon which also includes scanning functions. In addition, it comes with multi-colored cartridges which might be changed when a solitary color becomes dark. This printer cum scanner has no display screen. Moreover, you can directly connect to the computer or USB cables for printing or scanning purposes. You can connect this with a WiFi network. For home and small office purposes, this is the best option for you.

Guide For Setup Canon MG3500 Scanner

Therefore, if you recently purchased a Canon MG3500 scanner, then it is the best choice for you to scan professional documents. But if you do not know the procedures for the Canon MG3500 Scanner Setup, then you cannot able to work on it. Hence, you need proper guidelines in order to configure the scanner. Here, in this article, you will get a step-by-step process to set up your favorite scanner.

How to Scan with Canon mg3500 Scanner?

You can use this scanner in all types of operating systems. No matter you are using Windows or Mac OS, you can connect the scanner and scan your important files and documents with ease. Moreover, you can also connect it with your smartphone in order to scan your files directly from your phone. For this, you need to download the PIXMA printer which is an application from iTunes or Google Play Store.

Canon MG3500 Scanner Setup

Unpacking Canon Pixma MG3500 Scanner:

When you get the scanner, you need to check what the scanner box contains. Here, we have listed some of the parts that you will get when you unbox the Canon MG3500 scanner. Hence, check the list below:

  • First, you get a power cord and USB cable.
  • Secondly, set up guide and installation CD. It is always advised to keep the installation CD in a safe place, otherwise, you need to download the printer and scanner drivers from the official website of Canon.
  • Ink cartridge. PG-240 Black cartridge and CL-241 color cartridge.

Related Blog- Canon Pixma mg3500 Wireless Setup

Complete Process of Canon MG3500 Setup:

After getting the scanner, you might be wondering how it works. But to make this work, first, you need to set it up. Here are the steps for the Canon MG3500 scanner setup wirelessly. Hence, follow the steps and apply them in order to use the scanner in your workplace.

  • Firstly, take the power cable and connect one end of the cable plug into the printer and the other end with the wall outlet. Switch on the power, and press the Power button of the scanner. Then, you need to place the ink cartridges in their place. Push down the black throw in the first right on the right-hand side. Turn on the device and select the desired language. Then, press the OK button and turn the device off.
  • Secondly, to install the driver, you need to remove the installation CD from the packet. Now, you have to put the CD into the CD tray of your computer. Open the CD by doing right-click on the CD icon. After that, you need to agree to the User Agreement and press the Yes button.
  • Then, lift the scanner lid and place the cartridge holder in its original place. After inserting the cartridge properly, close the lid. Turn on the unit and press the Set button. Select Wi-Fi settings from the Control Panel option. After that, hit the OK button.
  • After that, select the Easy Setup which appears on the screen and press the Ok button. Now, connect the WEP key and hit the OK button. Now, connect the WEP key and click on the OK button. After that, choose the country and click the Next option. Now, select the easy install option and choose the Next option.
  • Now, choose to Use the Printer on the network and click on the Next option. A box will appear on the system screen which says Printer Detection and hit the Click option.

To sum up, you might have been able to gather all the information that you needed for the Canon MG3500 scanner setup. However, if there is any sort of query or any kind of feedback from your end, then you can contact a trained professional or else refer to the manual that is provided along with the Canon scanner.

How to Setup Canon Pixma i2800 Printer?

Setup Canon Pixma i2800 Printer

Canon Pixma i2800 is a printer that has one of the best features, that is, this device has  ‘Auto Power On’, ‘Quiet Mode’, ‘High-Resolution Prints’, etc. You need to set up the printer to utilize its features to gain the utmost experience. Further, if the printer is new, then you will have to do the setup. Another reason is if you reset the printer, then also you will have to go through the setup procedure. This article will provide you with the complete procedures on How To Setup a Canon Pixma i2800 printer. In the next section, you will get to learn the easy setup process of the Canon i2800 printer.

Procedures on How to Setup Canon Pixma i2800 Printer?

This section of the article will provide you with different points, that can help you to set up the Canon Pixma i2800 printer in a very easy and elaborate way.

Canon Pixma i2800 Wireless Setup

Learn how to set up the wireless connection:

  • First, be sure your Canon printer is switched on.
  • After that, on the printer, tap and then hold the ‘Wireless or WiFi’ button until the orange light flashes for one time. When the flash occurs, then release that button.
  • Now, inspect whether the WiFi button flashes blue light.
  • Next, locate the access point and then, hit the button ‘WPS’ after two minutes.
  • While the blue WiFi light flashes, the green power light will also start to flash. Once the connection is successful then, both the light will be static.
  • In order to see if the printer has a successful wireless connection, follow the below steps.
    • Ensure the printer is switched on.
    • After that, attempt to load the correct sized paper into the device.
    • Now, hit both the buttons ‘Cancel and down arrow key’, and keep it pressed until the orange light flashes fifteen times. After you have pressed the button that many times, then release it.
    • At last, the page of network information will get printed out.


How to Setup Canon Pixma i2800 Printer


Steps of Canon Pixma i2800 Printer Setup Compact Disc for Windows

If you have to use the setup disc then go through the points mentioned below:

  • First, put the disc that came along with your printer. Once you insert that disc, then it will execute automatically, due to the AutoRun feature.
  • When the ‘AutoPlay’ window comes up, then choose the option ‘MSsetup4.exe’. If the AutoRun feature does not occur, then locate ‘This PC’ and double-click on it.
  • After that, double-click on the CD-ROM icon to run the above-mentioned setup file directly.
  • When the setup window opens up, choose the ‘Next’ button. Then, from the next page of that window that says ‘Select the printer connection method’, choose the option ‘Wireless LAN Connection’. Now, again select the button ‘Next’.
  • In the new page of this window, choose the option ‘Access Point Connection (recommended)’. Then, choose the ‘Next’ button once again.
  • Now, be sure that the printer is switched on. You can check whether the device is On if you look at the green power light. Then, choose the button ‘Next’.
  • After that, the application will look for any other printers present on the network. Now, if this printer is the first one to connect to this network then, you will not get any other devices on the list. So, choose the option ‘Setting printer could not be found on the list. Then, the ‘Next’ button.

Installation Procedure of the Canon Pixma i2800 Wifi Setup

Here, you will get the installation procedure, have a look:

  • At this moment, the ‘Setup Installation Guide’ window will come up and the installation initiates. Once it is over, a window with the heading ‘Printer Setup’ will show up. In this window, choose the button ‘Next’.
  • On the new page of this window, find and select the button ‘Cableless setup’. On the next page ‘Connection via Cableless setup’, you will see a message. Hold down the WiFi button on the printer until the ‘Power’ light flashes, two times then, release the button after the next flash. Now, tap on the ‘Next’ button.
  • On the upcoming window, there is another message. Make sure that the ‘WiFi’ light flashes quickly and the ‘Power’ light is solid. Then, tap on the ‘Next’.
  • On the new window, that appears next, the following message will show up ‘Setting up. A network connection is temporarily disabled during setup. Please wait. When the connection is established, on the next window, you will get a message that says ‘Connection completed’. Click ‘Next’.
  • In the following two windows, after clicking on the ‘Next’ button, choose the location and then, choose the language you prefer respectively.
  • On the next window, you will get the list of software to be installed on the computer, put a checkmark on all the applications by tapping on the button ‘Select All’. Then, hit the ‘Next’. On the page ‘License Agreement Canon Products’, just tap on the ‘Yes’ button. Then, on the upcoming window, choose the ‘Next’ button. Now, the installation procedure will initiate. Wait for a few minutes, so that the process gets over.
  • When the installation is complete, a window with the name of the printer model and the wireless network name (SSID) will be shown. After that, tap on the ‘Complete’ button.

Easy Process to Align the Print Head

After the installation of the printer is complete, then follow these steps underneath.

  • When you see a new window, with the heading ‘Print Head Alignment’, then hit on the button ‘Execute’.
  • After that, follow the instructions that will come up on the screen in order to align the print head. Once it is complete, press the ‘Next’ button.
  • On the following window also select the ‘Next’.

Related Blog- Canon Pixma ip2820 Wireless Setup

Registration Steps for the Users

Follow the steps if you want to register as a new user:

  • On the window ‘User Registration’, if you want to register during the setup process then, hit the ‘Next’ button. Now, follow the information on the window accordingly.
  • Otherwise, if do not want to register at that very moment, then tap on the ‘Cancel’ button to stop the registration process.
  • Now, in the next window ‘Extended Survey Program’, if you want to get any benefit from this program, then click the button ‘Agree’. Otherwise, tap on the button ‘Do not agree’.

Test the Quality of Prints

Lastly, you have to test the quality of the print, to verify if the setup process was successful or not.

  • When the window with the name ‘Test Print’ comes up. Then, if you want to check the print quality of the printer, just tap on the ‘Execute’ button.
  • The printer will then load a  blank paper and print something which is provided by the software only. Once the testing is complete, hit the ‘Next’ button.
  • At last, tap on the ‘Exit’ button.

Final Note

This article provides easy steps on How to Setup Canon Pixma i2800 printer so that you can use this knowledge if you ever reset it. If, even after having good know-how about the setup process of this printer, you are unable to install the device in the correct way, then post your query in the comment section.

Canon MG2520 Scanner Setup

Canon MG2520 Scanner Setup

If you are looking for a device that can print quality pictures as well as crisp papers, then Canon MG2520 Scanner is the best in the market and it also comes with a downloaded driver. It is equipped with a hybrid ink system that blends color ink for scintillating color as well as black pigment ink for producing distinct texts. However, the setup of this scanner is not that much difficult, therefore you can easily do that without any trouble. It comes with a portable body that can fit anywhere inside your living room. This informative guide will give you step-by-step guidelines for the Canon MG2520 scanner setup.

Guide For Setup Canon MG2520 Scanner for Windows

You need to open printer driver software in Windows. The printer driver setup window can be put up with the use of application software. For that, follow the steps provided below

  • First of all, you need to open the driver setup window.
  • Then, you need to follow the below guidelines in order to set up the printing profile while you print.
  • After that, select the command that you wish to print.
  • Generally, choose Print available on the File menu in order to open the Print dialog box.
  • Then, you need to choose the model name. After that, select the Preferences option.

Steps For Canon Pixma MX2520 Scanner Setup

You will find the printer driver setup window. You need to choose certain items from the Start Menu as mentioned below.

  • If you are a Windows 7 user, choose the Start Menu. After that, select Drivers and Printers.
  • Moreover, if you are a Windows Vista user, you need to choose the Start Menu. Then, move to the Control Panel. After that, select Hardware and Sound. Now, click on Printers.
  • If you are a Windows XP user, you need to choose the Start Menu. Then, hover on to Control Panel. Now, under the Printers and Hardware, you need to click on Printers and Faxes.

After that, you need to right-click on the Model icon. Thereafter, choose Printing preferences available in the display menu.

Canon MG2520 Scanner Setup

Learn How to Install Canon MX2520 Scanner Mac OS X:

Follow the below steps for the Canon MG2520 Scanner Setup:

If you already made an attempt to install a driver for Canon Printer, then you need to delete it from the printers as well from the Fax System Preferences pane. Moreover, you need to go to the hard disk and open the Library. Then, move to the Printer option and trash the Canon folder.

  • After that, in the same folder move from the Library to the Printer. Then, you need to open the PPDs. Further, you need to trash any file which implies that the Canon Printer is installing.
  • However, if you have any spare Canon printer working, you need to selectively trash those files which are new.
  • Then, you need to restart and clean up the trash before moving on.
  • Now, you need to detach the Printer. Then, you can download the recent drivers and execute the installer package. Once you are done with installing the package, navigate to the System Preferences tab by pressing the Apple Icon placed at the top right corner. Now, you can connect the printer and turn it on.
  • Next, you have to open the Printer and Fax pane in order to open the Print and Fax preferences. Now, you need to tap button (+) on the left side in order to add a printer. You will find the name of your Canon printer in the list.
  • Press the model of the Canon printer you wish to install. After that, you need to tap on Choose a Driver or Printer Model. After that, press Select Printer Software. Then you need to select any printer from the list.
  • Finally, press OK for the successful installation.

However, if this doesn’t happen, you need to perform the above steps again. Then, you have to examine the followed instructions properly and follow the provided link to obtain the latest driver for the Canon MG2520 scanner that is compatible with the Mac OS X system. If the problem recurs, you need to go through the troubleshooting steps.

Troubleshooting Steps to Setup Canon Pixma MX2520 Scanner Mac OS X:

The only troubleshoot for the Canon MG2520 scanner setup is to examine you have the recent most driver for the operating system.

Mountain Lion and Lion are used for different systems. Therefore, you need to ensure the driver is for 10.7*10.8*i. In order to examine the version of your OS, you need to press the Apple icon on the top left. Now, you need to tap on About this Mac. It implies OS X, Version x.x.x.This is imperative since the installation methodologies are very much different.

Steps for Wireless Setup of Canon MG2520 Scanner:

  1. First of all, remove the external protective materials entirely.
  2. You need to open the paper output tray placed on the front side. Now, you have to lift the scanner unit cover to the cartridge holder.
  3. Then, peel out the cartridge holder. Also, remove the protective coverings.
  4. After that, you need to link to the power source. This can be done by connecting one end to the proper interface of the printer. You can connect the other one to the wall power outlet.
  5. Then, you need to turn on the unit as well as you need to select your preferred language. After that, you need to press the OK button and turn off the back unit.
  6. Hoist the scanner cover in order to insert the cartridge holder back again. Now, you need to close down the lid.
  7. Then, turn on the unit. After that, tap the Set Up button. Next, you need to choose the wireless LAN setup through the operation panel.
  8. Now, click on the OK button and choose the easy setup.
  9. Then, click the OK button and choose the Access Point. Next, you need to press the OK button and feed this with WEP-key. Again, tap the OK button and plugin the companion CD. Next, you need to execute the program from the autoplay.
  10. Choose the country where you are residing. Then, press Next. Now, you need to select Easy Install and tap on the Next button. After that, choose to Use The Printer on the Network and press Next. You will find a window of Printer Detection and then press Next.

Related Blog- Canon MX490 Scanner Setup

Canon mg2520 Scanner Not Working:

  1. First of all, you have to enter PIXMA in the Enter a Model option and press the Go option.
  2. Moreover, navigate to the Driver & Downloads tab, under the Recommended section.
  3. Now, you need to press the Select button just beside the MG2520 series Full Driver & Software Package.
  4. Then, press the Download button.
  5. Now, if you find a save Dialog box, press Save.
  6. When the downloading is done, you need to open the Downloads folder.
  7. Next, you need to press Driver Canon MG252O. You will find a disk image.
  8. Now, double-click on Disk Image.
  9. Finally, you have to double-click the Setup file if you wish to establish the setup screen.

To Sum It Up

In a nutshell, this article will give you a thorough methodology of the Canon MG2520 scanner setup. Apart from the general setup, this article also covers the step-by-step setup of this scanner in different Windows versions and Mac. Moreover, this user guide contains the information which is provided during the initial setup. Henceforth, you can always refer to the user guide to have a quick glance. Also, you can leave your valuable feedback in the comment section.

Canon Pixma mg8120 Wireless Setup

Canon Pixma mg8120 Wireless Setup

Canon MG8120 is a wireless all-in-one printer that is designed beautifully and has exceptional functionality and flexibility. It has in-built WiFi that makes it easy to complete the scanning and as well as printing process without any trouble. This printer is really one of the most preferable ones for a number of users. So, if you are also a Canon user, then you must want to know Canon Pixma mg8120 Wireless Setup. Keeping that in the mind, here in this article, we are going to discuss some excellent and workable methods that will definitely help you to fix the problem as well. So, read the entire guide and complete the setup process at the earliest possible.

Method to Complete Canon MG8120 Wireless Setup

Users may come up with multiple procedures to set up the Canon printer. Here in this section, you can find some methods which can ensure the most effective Canon mg8120 Wireless Setup. So, it is recommended that execute the steps exactly the same as described below:

Method 1: Steps For Canon MG8120 Wifi Setup

By these methods, you can easily connect to Canon MG8120 Wifi Setup by using a USB cable. Now, have a look at this section and follow the steps:

  • The first thing you have to do is to insert the software installation disc into the printer. After that, you have to sure that the installed software has access to the network of the router.
  • After that, connect your Canon printer to the device with the USB cable.
  • Next, choose the Start button and tap on the Programs option.
  • Now, tap on the “Canon Printers” option and navigate to the “Canon Printer Home” icon.
  • After that, tap on the Settings tab and choose the Wireless Setup Utility.
  • Now, you will get a list of available networks. Then, you have to select your required Wifi network that is located under the list of available networks.
  • Then, click on the Continue icon. Now, you have to enter the passcode of the WiFi network to connect to the internet. Finally, choose the Continue option once more if a pop-up dialog box is asking to allow your Canon software to access the network.
Canon Pixma mg8120 wireless setup
Canon Pixma mg8120 wireless setup

Method 2: Install Canon mg8120 Printer Setup Using WPS

If you go through these steps you will easily Install the Canon mg8120 Printer Setup with the wireless network. Moreover, by this WPS method, you can configure your printer without any hassle. Thus, follow these steps carefully and execute them exactly the same:

  • The very first thing you have to do is to, make sure that your Canon printer and the router support WPS, otherwise this method will not be helpful for you.
  • After that, tap on and hold the WPS key on your Canon printer for more than ten seconds. Then, you will receive a message that the WPS mode is running on your device.
  • Next, you have to tap on and hold the WPS key on your router.  After completing the process keep waiting for a few minutes while both of the devices get connected.
  • Finally, try to print a settings report. Check if your Canon printer has successfully connected with your wireless network or not.

    Related Blog- Canon Pixma ip2820 Wireless Setup

Method 3: Connect Canon Inkjet Pixma mg8120 Printers setup

Follow the steps to Connect Canon Inkjet mg8120 Printers Setup issue. The first and foremost thing you have to do is to press the Menu button of your Canon printer. Then, select the system option by clicking on it. After that, you have to click on the Admin menu and then, navigate to the Network option. After selecting the option you need to choose the Wireless Setup icon and click on it. Now, you will get a list of networks that are available for your device. You have to select a network under the available network list as per your choice. Then, put the password of the network and tap on OK. At the final step try to print a page and check if you successfully set up your canon printer or not,

To Conclude:

Expectedly the above solutions, you will be able to connect the Canon printer with the wireless network. Moreover, you can get the most effective hacks to know the procedures of the Canon Pixma mg8120 Wireless Setup. However, we assure you that you won’t need any extra technical knowledge to perform the setup steps. But, in case if you find any trouble while you’re performing these steps, then you can write to us without any delay. Give your valuable feedback in the comment box.

Canon MX490 Scanner Setup

Canon MX490 Scanner Setup

Canon MX490 scanner is one of the best scanners in the market. This scanner is enriched with smart and advanced features. The Canon MX490 scanner is a smart device. A scanner needs to be set up before using it. If you are the owner of a Canon MX490 scanner, then at first, you will need to know the setup procedure of it. Here, in this article, we are going to discuss some of the easy steps that can help you to know the Canon MX490 scanner setup procedure. Go through the entire article to know the details.

Guide For Setup Canon MX490 Scanner

Now, here, in this part of the article, we are going to present a detailed discussion on the procedure for Setup Canon MX490 Scanner

. Go through the part to know the details.

Guide For Canon mx490 Scanner Setup
Canon mx490 Scanner Setup

Canon Pixma MX490 Scanner Setup Procedure for Windows 

If you are a Windows user, then the following part of the article will help you to set up your Canon Pixma MX490 Scanner Setup. Go through the article to know the details on it.

Step 1: Collect the Required Things

To set up your Canon MX490 scanner, at first, you will need to gather some required information:

  1. At first, you need to know the SSID.
  2. The passcode of it which will be the WEP key or WPA.
  3. A computer to connect the scanner with.
  4. The internet access point, such as cable or DSL.
  5. You need to place the scanner near the computer at the time of the installation procedure.
  6. You can use the USB port while the wireless installation procedure is going on.

Now, you need to put all the things together, such as a laptop, printer, USB port, CD driver, and connect it with your printer.

Step 2: Download the Installation File

After, completing all the tasks which were mentioned in the above part of the article, now check if the USB cable is compatible with your laptop’s USB slot or not. You can download the installation files from the website. But, before doing that, you have to be sure that have you downloaded the proper installation file that suits your printer model. Here, are the steps to download the installation file.

  • At first, click on the official site to download the installation file and click on the Save button. You can also use the Save As option. Thereafter, click on the download the file option.
  • After that, the downloaded file will be saved in a particular location in the self-extracting form.
  • At the next step, double-click on the downloaded. EXE file. This will help you to start the installation procedure automatically.

Step 3: Enter your Personal Data

Once you are done with all the steps which are described in the previous part, now enter the installation location, your name, and personal information as per the requirement. You have to fill in all those information properly.

After completing all these procedures, now the scanner is ready to use. Now, you should try to scan something to check if the device is properly working or not.

Setup Canon Pixma MX490 Scanner Procedure for Mac

Now, here we are going to discuss the steps to set up Canon Pixma mx490 Scanner for Mac users.

Step 1: Gather all the Necessary Information

To set up the Canon PIXMA MX490 Scanner, at first, you will need to gather all the necessary information, such as network name, network password, an internet access point as in cable or DSL.

Step 2: Download the Installation File

After, gathering all the necessary information, now Move forward with the procedure to download the installation file. To do it, you have to follow the steps which are mentioned before in the previously described part of the article.

Step 3: Open the Computer Settings

Once you have completed the steps to download the installation file, then move on to the location where the file is saved. After that, go to the Computer Settings option to check the installation file.

Step 4: Mount the Disk Image

After that, double-click on the Downloaded File option. Then, click on the Mount it on the Disk image option. Thereafter, double click on the Mounted Disk Image. Next, you need to double click on the Packaged file in the folder option. After that, the installation procedure will start automatically.

Conclusion For Canon MX490 Scanner setup

I hope, this article helped you with the Canon MX490 scanner setup. If you have any questions regarding this topic, then comment below. To get more information on the Canon scanner, you can visit our official website.

Canon MX922 Printer Bluetooth Setup

Canon MX922 Printer Bluetooth Setup

Canon MX922 printer can wirelessly print all of the document using the built-in WiFi adapter, and even use conventional methods. If you do not have the wireless connectivity then there is no possibility of wireless printing of any document. You will then be required to use the printer via a USB cable which is connected to the PC. There is another way to print any document wirelessly i.e. use the ‘bluetooth’ connection. But, since no Bluetooth adapter is present within the Canon MX922 printer, therefore you have to get the adapter, and then print the document. Now, the Bluetooth adapter should installed in a proper pathway in order to use it. So, this article will provide guidance on the process of Canon MX922 Printer Bluetooth Setup. To set up the Bluetooth on the Canon Printer, proceed to the next segment.


Ways to Setup Bluetooth on the Canon MX922 Printer

In this section, you will get the Canon MX922 printer Bluetooth setup guidance.

Insert the Bluetooth Adapter into the Printer

To connect the Bluetooth adapter follow the steps:

  • First of all, turn printer on.
  • Input the Bluetooth adapter into the USB port that is located on the printer’s front side.
  • Now, open the adapter cap and start mounting the Bluetooth unit. If you do so, the LCD display will display a message.

Steps to Install the MP Drivers

Now, to continue with the setup process you need to install the MP Drivers.

  • Switch off the printer, first. Tap the ‘On / Off’ button for that. Then, be sure not to illuminate every LED present on the service panel.
  • Now, get the machine going. Next, plug into the drive the Setup CD that came with the printer.
  • The CD will then automatically run, and the window ‘AutoPlay’ will appear. Click the ‘Run Msetup4.exe’ option when this window appears..
  • When a window appears with the heading ‘User Account Control,’ press the ‘Continue’ button.
  • Now the central menu window appears. Select the ‘Simple Download’ option in that pane.
  • When this is completed a new window should appear with the heading ‘Fast Download.’ You will see the list of available programs in that window, select the programs you want to install and finally tap on the ‘Install’ button.
  • You can then read the ‘End User License Agreement’ on the next tab, and press the ‘Agree’ button.
  • Now, link the printer to your machine and turn it on through a USB cable. Before that the printer’s ‘Copy’ button will flashlight for a couple of seconds, then it will become solid. Which means the application may find the printer connected to the PC.
  • Once the MP driver configuration is over, you’ll get the window with the ‘Installation Complete’ heading. Afterwards press the ‘Next’ button.
  • The next window to appear is the ‘User Registration’ window, simply click on ‘Cancel’ to later register the computer. Then the window ‘PIXMA Extended Survey Program’ appears, if you want this program then press the ‘Accept’ button, otherwise click the button ‘Do not agree’.
  • Eventually, when the total MP driver installation is complete, simply tap the ‘Exit’ button.

Setting the Bluetooth Functionality on the Printer

Here, you need to know how to set up the Bluetooth features on the Canon printer at this point and the instructions are given below.

  • Also ensure the Bluetooth adapter is installed into the printer and turned on.
  • After that, pick the choice ‘Press Setup’ from the printer operations screen.
  • Then select the option ‘System Settings’ by using the right arrow key. Tap the ‘OK’ button then.
  • Now, click the down arrow key and pick the ‘Bluetooth Settings’ option and click the ‘OK’ button.
  • Choose the choice ‘Pick system name’ from the ‘Bluetooth settings’ tab. After that you can select your device’s name from the list in the new window.
  • Once the printer name is tested, simply hit the ‘OK’ button.

Procedure to Register the Printer

You will need to sign it with the Windows Operating System in order to mark the Canon Printer as a Bluetooth device. The registration process steps specifically for Windows 7 are provided here.

  • First, press the ‘Start’ button, then locate and select the ‘Control Panel’ option on the right hand side of the menu.
  • Then, the window ‘Control Panel’ opens.
  • Find and then pick the category ‘Hardware and Sound’ inside this tab. After that, select the choice ‘Bluetooth App’ from next window.
  • Next pick the option ‘Connect a Bluetooth App’ from the new window.
  • When the previous choice is selected, the name ‘Pair with a wireless computer’ will appear in a new window. In this window the OS will automatically scan for the printer that will appear on the list if the computer is found then.
  • Choose the app name from the list and then press the ‘Next’ button. Now, select the option ‘Pair without a wireless computer’ in the next tab. using a code. Now, tap on the button ‘Next’.
  • When the pairing process is underway you will see a message showing ‘Connecting with this app.’ The message ‘This tool has been successfully connected to this machine’ will pop up after the registration is complete.
  • Then, press the Close button.

Related Blog : Canon pixma ip2820 Wireless Setup

Removal Procedure of the Registered Printer

You will also get the procedure on how to uninstall the printer that is registered as a Bluetooth device on the machine in Canon MX922 Printer Bluetooth setup guide process. Also, you’ll have to uninstall the computer to register the printer once more. Follow these measures below, for that.

  • Next, press the Windows and R key combination to simultaneously launch the ‘Start’ dialog box.
  • When the dialog box opens, type the “Control Panel” command and then press the ‘Enter’ key. This will open a window called ‘Control Panel.’
  • When in the ‘Control Panel’ window, go to the ‘Hardware and Sound’ tab. Next select the option ‘Devices and Printers’ from the new page.
  • Now, pick the icon with the Canon Printer name from the window that appears.
    Finally , select ‘Delete App’ option. It will uninstall the Canon MX922 impressor from your PC.

Detach the Bluetooth Adapter from the Printer

Some circumstances can occur in which you need to disconnect and attach the Bluetooth adapter again. These points will show you specific instructions on how the Bluetooth adapter can be removed from the printer.

  • Next, just uninstall the Bluetooth Adapter from your printer’s USB port. You remove the adapter beforehand, and test if the light is on or not. If the adapter just has no light illumination then disable it otherwise not.
  • Replace the cap and keep it in a safe place. Finally, follow the steps set out above to re-connect the Bluetooth adapter in this article.

Contact for Help

This article includes as simple and as compact as possible detailed steps on the Canon MX922 Printer Bluetooth Setup process. Now, even after following all the points on the above section, if you are unable to set up the printer then post the question in the comment section below.

Canon pixma ip2820 Wireless Setup

Setup Canon pixma ip2820 Printer Manually

In this blog we have shared the steps to Canon pixma ip2820 Wireless Setup. We have cleared the setup Canon pixma ip2820 printer process for both wired and wireless connection.

For someone who doesn’t want to get engulfed by tons of technological bugs when printing the document will use the Ip2820 Printer System Canon Pixma. As it is the printer that has the auto-power feature that will make it easy to print in a short time. It’s a special edition printer designed to provide its users with the high quality printing solution.

And if you plan to buy a new printer for your home or office premises, Canon Pixma Printer is the cheapest one you can purchase in your budget. You must know how to configure after buying this printing machine otherwise you would not be able to print any urgent documents. If you have less technical knowledge, and are therefore unable to do so to Setup Canon Pixma Ip2820 Printer Manually by your own,Then give a look at this article without wasting your time. You’ll see the real instructions for doing so here.


After unpacking the iP2820 printer from the box on Canon Pixma, perform the initial installation process to prepare the printer for configuration. Follow the steps given-

  • Hold your iP2820 Canon Pixma printer at a position where you can comfortably handle it.
  • Place the cartridges into the slots you need.
  • Link the printer’s power cable to complete the print setup process.

Canon pixma ip2820 Wireless Setup

To setup Canon Pixma iP2820 printer using wired connection, follow the below steps-

  • Switch your Canon Printer ON first by pressing the Power button
  • Then connect the flat end of the USB cable to the computer or laptop, and the USB cable square end to the printer.
  • Now, in a pop-up window, your machine will show the message “new hardware found”
  • Go to the post and follow the steps to connect the canon printer to the machine.
  • Once the two devices are paired, download the Canon PIXMA iP2820 driver from Canon ‘s website, as per your operating systems.
  • Install the downloaded driver now, and finish the setup. Now your printer’s ready to print.

Hence, this is the complete process of setting up Canon Pixma iP2820 with the aid of a USB cable using wired PC link.

Related Blog : Canon Pixma MG2520 Wireless Setup

Canon pixma ip2820 Wifi Setup Process

Follow the below steps for Canon Pixma iP2820 printer setup

  • Turn your Canon printer on first.
  • Test the press power button for the printer. If it appears green, that means the printer is on.
  • After that press the canon printer on the Setup Button
  • Now use the < or > button to select ‘Wireless Lan’ setup option.
  • Now hit the ‘OK’ button.
  • If the blue Wi-Fi lamp is lit, it means the wireless connection is on.
  • Now wait until Canon printer automatically checks for the compatible access points.
  • Now download and install the Canon printers driver as shown above, from the Canon website.
  • Canon Pixma iP2820 printer is finally linked to Wi-Fi and the wireless setup process for Canon Pixma iP2820 is complete.

Connect Canon pixma ip2820 Printer to Wifi and Wireless Network

You will be able to setup Canon Pixma iP2820 printer using wired or wireless connection by following the troubleshooting steps mentioned in this article. In case you face any problems with printer setup, you can contact us further on our helpline.

How to Fix Canon Printer Not Printing Black ?

Canon Printer Not Printing Black

Canon is one of those brands that is very popular because of its high quality printer. But even Canon Printer ends up with different types of errors and problems after a certain point of time. Canon Printer Not Printing Black are one of those common issues that currently affect a wide variety of Canon printers. This problem usually occurs when users try to print something in black but due to various internal problems the printer is unable to execute it. Apart from that, due to some common system problems this issue also gets activated. Now, if you’re one of those who see this problem every day, you can follow this article to solve it.


My Printer Won’t Print in Black: What Should I Do?

For this error both the Canon printer and the device connected to it are responsible. There are a lot of problem factors which can cause this issue. Currently, the most effective way to repair the Canon printer won’t print in black problem, the consumer needs to first define those factors. That’s why we’ve provided some of the most important factors about this issue in this section. Look at them and try to compare them with your case.

  1. Very Dirty or unmaintained Your Canon printer.
  2. Use Third-party ink cartridges.
  3. Check Outdated Printer Driver.
  4. Check Faulty ink cartridges.

Now, if you’ve identified all the possible causes of the problem, let ‘s look at the solutions.

Best Ways to Fix the Canon Printer Not Printing Black Issue

There are several ways you can address this problem on the Canon Printer. But, to get a good result, you have to apply them properly. Below are some of the most successful solutions to this problem, take a look at them and try using them as instructed.

  • Check Basic Requirements

Canon users most of the time get this problem due to some common errors such as empty ink cartridge, incorrectly mounted ink cartridge, incorrect printing settings etc. Each consumer should therefore test these common items before going to any big solutions. Now, if all of the items described in this section function properly, then proceed to other methods in this section.

  • Clean the Canon Printer

After a certain period of time, every Canon printer needs proper maintenance or cleaning up. But, if the user doesn’t follow this rule or don’t know about it, then they may face technical glitches. Now, if you are one of those users then, it is quite possible that the Canon printer doesn’t print black issue is appearing on your system. Now, if you want to fix this problem, then try the given steps.

  1. You need to open the printer first.
  2. Instead, the paper output tray and the exit tray extension must be removed.
  3. Make sure your printer tray includes at least 5 A4 size paper when doing that.
  4. Now go to your Canon Printer Control Panel and click the Setup icon to start the cleanup process.
  5. You can find the Tool icon on the Setup tab. Click here..
  6. Inside the Tool window, you need to locate and select the Maintenance Menu. After that, hit the OK button to open it.
  7. Now, in the Maintenance Menu, you need to search for the ‘Deep cleaning’ option. Once you find, select it and tap on the OK button.
  8. Instantly a confirmation prompt will appear on your screen. There you have to select the YES option and then, hit the OK button.

The Canon Printer will begin its cleaning process after this. Wait for completion of the cleanup process at some time. Once done, reboot your Canon printer and check whether the problem is fixed or not.

  • Use Genuine Ink Cartridge

This form of problem is often faced by Canon printer users due to the use of a third party cartridge. Printer manufacturers like Canon typically designed their ink cartridges according to the model or sequence of the printers. Third-party ink cartridge, however, can not design their product accordingly. This induces problems of misalignment in the printer. Currently, if you use some third-party ink cartridges on your Canon printer then you have to remove it in order to address the non-printing problem. Seek to print something after that, and check the issue.

  • Update the Printer Drives

The Canon printer can generate problems in certain situations due to outdated Printer drivers. Now, if you haven’t updated your Printer drivers for a very long time , it causes this problem. Now, if you want your Printer drivers to be modified, then follow the steps provided.

  1. Click the Windows key + R to open the Run dialog window. Now type “devmgmt.msc” in the dialog box, and press either the OK button or the Enter key.
  2. On the computer the System Manager window will open immediately. You must find the choices for the Printer Driver there and then right-click them.
  3. Now, your computer should have a pop-up menu showing. You can find the Update driver option on that page. Click on the.
  4. You just need to obey the on-screen instructions after that to complete the update phase.

When the updating process is through, reboot the system and check whether or not the problem still exists.

Now, Fixed Printer not printing black issues

We hope our solutions and suggestions are helpful enough to solve the problem of Canon printers not printing black. Keep following our articles for more Tech-related content.

Related Blog : Canon Printer Error E02

Call Now ButtonCall Now
error: Content is protected !!