Web
Analytics
Canon MX922 Printer Bluetooth Setup

Canon MX922 Printer Bluetooth Setup

Canon MX922 printer can wirelessly print all of the document using the built-in WiFi adapter, and even use conventional methods. If you do not have the wireless connectivity then there is no possibility of wireless printing of any document. You will then be required to use the printer via a USB cable which is connected to the PC. There is another way to print any document wirelessly i.e. use the ‘bluetooth’ connection. But, since no Bluetooth adapter is present within the Canon MX922 printer, therefore you have to get the adapter, and then print the document. Now, the Bluetooth adapter should installed in a proper pathway in order to use it. So, this article will provide guidance on the process of Canon MX922 Printer Bluetooth Setup. To set up the Bluetooth on the Canon Printer, proceed to the next segment.

Setup-Canon-Printer-with-Wireless-Network

Ways to Setup Bluetooth on the Canon MX922 Printer

In this section, you will get the Canon MX922 printer Bluetooth setup guidance.

Insert the Bluetooth Adapter into the Printer

To connect the Bluetooth adapter follow the steps:

  • First of all, turn printer on.
  • Input the Bluetooth adapter into the USB port that is located on the printer’s front side.
  • Now, open the adapter cap and start mounting the Bluetooth unit. If you do so, the LCD display will display a message.

Steps to Install the MP Drivers

Now, to continue with the setup process you need to install the MP Drivers.

  • Switch off the printer, first. Tap the ‘On / Off’ button for that. Then, be sure not to illuminate every LED present on the service panel.
  • Now, get the machine going. Next, plug into the drive the Setup CD that came with the printer.
  • The CD will then automatically run, and the window ‘AutoPlay’ will appear. Click the ‘Run Msetup4.exe’ option when this window appears..
  • When a window appears with the heading ‘User Account Control,’ press the ‘Continue’ button.
  • Now the central menu window appears. Select the ‘Simple Download’ option in that pane.
  • When this is completed a new window should appear with the heading ‘Fast Download.’ You will see the list of available programs in that window, select the programs you want to install and finally tap on the ‘Install’ button.
  • You can then read the ‘End User License Agreement’ on the next tab, and press the ‘Agree’ button.
  • Now, link the printer to your machine and turn it on through a USB cable. Before that the printer’s ‘Copy’ button will flashlight for a couple of seconds, then it will become solid. Which means the application may find the printer connected to the PC.
  • Once the MP driver configuration is over, you’ll get the window with the ‘Installation Complete’ heading. Afterwards press the ‘Next’ button.
  • The next window to appear is the ‘User Registration’ window, simply click on ‘Cancel’ to later register the computer. Then the window ‘PIXMA Extended Survey Program’ appears, if you want this program then press the ‘Accept’ button, otherwise click the button ‘Do not agree’.
  • Eventually, when the total MP driver installation is complete, simply tap the ‘Exit’ button.

Setting the Bluetooth Functionality on the Printer

Here, you need to know how to set up the Bluetooth features on the Canon printer at this point and the instructions are given below.

  • Also ensure the Bluetooth adapter is installed into the printer and turned on.
  • After that, pick the choice ‘Press Setup’ from the printer operations screen.
  • Then select the option ‘System Settings’ by using the right arrow key. Tap the ‘OK’ button then.
  • Now, click the down arrow key and pick the ‘Bluetooth Settings’ option and click the ‘OK’ button.
  • Choose the choice ‘Pick system name’ from the ‘Bluetooth settings’ tab. After that you can select your device’s name from the list in the new window.
  • Once the printer name is tested, simply hit the ‘OK’ button.

Procedure to Register the Printer

You will need to sign it with the Windows Operating System in order to mark the Canon Printer as a Bluetooth device. The registration process steps specifically for Windows 7 are provided here.

  • First, press the ‘Start’ button, then locate and select the ‘Control Panel’ option on the right hand side of the menu.
  • Then, the window ‘Control Panel’ opens.
  • Find and then pick the category ‘Hardware and Sound’ inside this tab. After that, select the choice ‘Bluetooth App’ from next window.
  • Next pick the option ‘Connect a Bluetooth App’ from the new window.
  • When the previous choice is selected, the name ‘Pair with a wireless computer’ will appear in a new window. In this window the OS will automatically scan for the printer that will appear on the list if the computer is found then.
  • Choose the app name from the list and then press the ‘Next’ button. Now, select the option ‘Pair without a wireless computer’ in the next tab. using a code. Now, tap on the button ‘Next’.
  • When the pairing process is underway you will see a message showing ‘Connecting with this app.’ The message ‘This tool has been successfully connected to this machine’ will pop up after the registration is complete.
  • Then, press the Close button.

Related Blog : Canon pixma ip2820 Wireless Setup

Removal Procedure of the Registered Printer

You will also get the procedure on how to uninstall the printer that is registered as a Bluetooth device on the machine in Canon MX922 Printer Bluetooth setup guide process. Also, you’ll have to uninstall the computer to register the printer once more. Follow these measures below, for that.

  • Next, press the Windows and R key combination to simultaneously launch the ‘Start’ dialog box.
  • When the dialog box opens, type the “Control Panel” command and then press the ‘Enter’ key. This will open a window called ‘Control Panel.’
  • When in the ‘Control Panel’ window, go to the ‘Hardware and Sound’ tab. Next select the option ‘Devices and Printers’ from the new page.
  • Now, pick the icon with the Canon Printer name from the window that appears.
    Finally , select ‘Delete App’ option. It will uninstall the Canon MX922 impressor from your PC.

Detach the Bluetooth Adapter from the Printer

Some circumstances can occur in which you need to disconnect and attach the Bluetooth adapter again. These points will show you specific instructions on how the Bluetooth adapter can be removed from the printer.

  • Next, just uninstall the Bluetooth Adapter from your printer’s USB port. You remove the adapter beforehand, and test if the light is on or not. If the adapter just has no light illumination then disable it otherwise not.
  • Replace the cap and keep it in a safe place. Finally, follow the steps set out above to re-connect the Bluetooth adapter in this article.

Contact for Help

This article includes as simple and as compact as possible detailed steps on the Canon MX922 Printer Bluetooth Setup process. Now, even after following all the points on the above section, if you are unable to set up the printer then post the question in the comment section below.

Canon pixma ip2820 Wireless Setup

Setup Canon pixma ip2820 Printer Manually

In this blog we have shared the steps to Canon pixma ip2820 Wireless Setup. We have cleared the setup Canon pixma ip2820 printer process for both wired and wireless connection.

For someone who doesn’t want to get engulfed by tons of technological bugs when printing the document will use the Ip2820 Printer System Canon Pixma. As it is the printer that has the auto-power feature that will make it easy to print in a short time. It’s a special edition printer designed to provide its users with the high quality printing solution.

And if you plan to buy a new printer for your home or office premises, Canon Pixma Printer is the cheapest one you can purchase in your budget. You must know how to configure after buying this printing machine otherwise you would not be able to print any urgent documents. If you have less technical knowledge, and are therefore unable to do so to Setup Canon Pixma Ip2820 Printer Manually by your own,Then give a look at this article without wasting your time. You’ll see the real instructions for doing so here.

Setup-Canon-Printer-with-Wireless-Network

After unpacking the iP2820 printer from the box on Canon Pixma, perform the initial installation process to prepare the printer for configuration. Follow the steps given-

  • Hold your iP2820 Canon Pixma printer at a position where you can comfortably handle it.
  • Place the cartridges into the slots you need.
  • Link the printer’s power cable to complete the print setup process.

Canon pixma ip2820 Wireless Setup

To setup Canon Pixma iP2820 printer using wired connection, follow the below steps-

  • Switch your Canon Printer ON first by pressing the Power button
  • Then connect the flat end of the USB cable to the computer or laptop, and the USB cable square end to the printer.
  • Now, in a pop-up window, your machine will show the message “new hardware found”
  • Go to the post and follow the steps to connect the canon printer to the machine.
  • Once the two devices are paired, download the Canon PIXMA iP2820 driver from Canon ‘s website, as per your operating systems.
  • Install the downloaded driver now, and finish the setup. Now your printer’s ready to print.

Hence, this is the complete process of setting up Canon Pixma iP2820 with the aid of a USB cable using wired PC link.

Related Blog : Canon Pixma MG2520 Wireless Setup

Canon pixma ip2820 Wifi Setup Process

Follow the below steps for Canon Pixma iP2820 printer setup

  • Turn your Canon printer on first.
  • Test the press power button for the printer. If it appears green, that means the printer is on.
  • After that press the canon printer on the Setup Button
  • Now use the < or > button to select ‘Wireless Lan’ setup option.
  • Now hit the ‘OK’ button.
  • If the blue Wi-Fi lamp is lit, it means the wireless connection is on.
  • Now wait until Canon printer automatically checks for the compatible access points.
  • Now download and install the Canon printers driver as shown above, from the Canon website.
  • Canon Pixma iP2820 printer is finally linked to Wi-Fi and the wireless setup process for Canon Pixma iP2820 is complete.

Connect Canon pixma ip2820 Printer to Wifi and Wireless Network

You will be able to setup Canon Pixma iP2820 printer using wired or wireless connection by following the troubleshooting steps mentioned in this article. In case you face any problems with printer setup, you can contact us further on our helpline.

How to Fix Canon Printer Not Printing Black ?

Canon Printer Not Printing Black

Canon is one of those brands that is very popular because of its high quality printer. But even Canon Printer ends up with different types of errors and problems after a certain point of time. Canon Printer Not Printing Black are one of those common issues that currently affect a wide variety of Canon printers. This problem usually occurs when users try to print something in black but due to various internal problems the printer is unable to execute it. Apart from that, due to some common system problems this issue also gets activated. Now, if you’re one of those who see this problem every day, you can follow this article to solve it.

canon-printer-support

My Printer Won’t Print in Black: What Should I Do?

For this error both the Canon printer and the device connected to it are responsible. There are a lot of problem factors which can cause this issue. Currently, the most effective way to repair the Canon printer won’t print in black problem, the consumer needs to first define those factors. That’s why we’ve provided some of the most important factors about this issue in this section. Look at them and try to compare them with your case.

  1. Very Dirty or unmaintained Your Canon printer.
  2. Use Third-party ink cartridges.
  3. Check Outdated Printer Driver.
  4. Check Faulty ink cartridges.

Now, if you’ve identified all the possible causes of the problem, let ‘s look at the solutions.

Best Ways to Fix the Canon Printer Not Printing Black Issue

There are several ways you can address this problem on the Canon Printer. But, to get a good result, you have to apply them properly. Below are some of the most successful solutions to this problem, take a look at them and try using them as instructed.

  • Check Basic Requirements

Canon users most of the time get this problem due to some common errors such as empty ink cartridge, incorrectly mounted ink cartridge, incorrect printing settings etc. Each consumer should therefore test these common items before going to any big solutions. Now, if all of the items described in this section function properly, then proceed to other methods in this section.

  • Clean the Canon Printer

After a certain period of time, every Canon printer needs proper maintenance or cleaning up. But, if the user doesn’t follow this rule or don’t know about it, then they may face technical glitches. Now, if you are one of those users then, it is quite possible that the Canon printer doesn’t print black issue is appearing on your system. Now, if you want to fix this problem, then try the given steps.

  1. You need to open the printer first.
  2. Instead, the paper output tray and the exit tray extension must be removed.
  3. Make sure your printer tray includes at least 5 A4 size paper when doing that.
  4. Now go to your Canon Printer Control Panel and click the Setup icon to start the cleanup process.
  5. You can find the Tool icon on the Setup tab. Click here..
  6. Inside the Tool window, you need to locate and select the Maintenance Menu. After that, hit the OK button to open it.
  7. Now, in the Maintenance Menu, you need to search for the ‘Deep cleaning’ option. Once you find, select it and tap on the OK button.
  8. Instantly a confirmation prompt will appear on your screen. There you have to select the YES option and then, hit the OK button.

The Canon Printer will begin its cleaning process after this. Wait for completion of the cleanup process at some time. Once done, reboot your Canon printer and check whether the problem is fixed or not.

  • Use Genuine Ink Cartridge

This form of problem is often faced by Canon printer users due to the use of a third party cartridge. Printer manufacturers like Canon typically designed their ink cartridges according to the model or sequence of the printers. Third-party ink cartridge, however, can not design their product accordingly. This induces problems of misalignment in the printer. Currently, if you use some third-party ink cartridges on your Canon printer then you have to remove it in order to address the non-printing problem. Seek to print something after that, and check the issue.

  • Update the Printer Drives

The Canon printer can generate problems in certain situations due to outdated Printer drivers. Now, if you haven’t updated your Printer drivers for a very long time , it causes this problem. Now, if you want your Printer drivers to be modified, then follow the steps provided.

  1. Click the Windows key + R to open the Run dialog window. Now type “devmgmt.msc” in the dialog box, and press either the OK button or the Enter key.
  2. On the computer the System Manager window will open immediately. You must find the choices for the Printer Driver there and then right-click them.
  3. Now, your computer should have a pop-up menu showing. You can find the Update driver option on that page. Click on the.
  4. You just need to obey the on-screen instructions after that to complete the update phase.

When the updating process is through, reboot the system and check whether or not the problem still exists.

Now, Fixed Printer not printing black issues

We hope our solutions and suggestions are helpful enough to solve the problem of Canon printers not printing black. Keep following our articles for more Tech-related content.

Related Blog : Canon Printer Error E02

Call Now ButtonCall Now
error: Content is protected !!