How to Connect Canon Pixma TS6120 Printer to WiFi?

Connect Canon Pixma TS6120 Printer to WiFi

If you want to print or scan your canon pixma ts6120 printer wirelessly on a windows desktop, you need to make sure that your printer is linked to Wi-Fi and that the required apps and drivers are installed on your computer system. To connect my canon pixma ts6120 printer to Wi-Fi, the instructions provided below have the required measures to follow.

The installation procedure is divided into two parts:

• Easy wireless connection on your printer

• Download and operate the configuration file for installing drivers and software Start with Easy Wireless Connection on Your Printer Before setting up the phone, smartphone, or computer system. Start with your printer’s simple wireless connection. After that, on your device or computer system, you can begin the installation procedure.

These are the simple steps one needs to follow to perform the Easy Wireless Procedure.

Step 1: First of all, your printer must be switched on. If it is switched on, they will be lit by the energy lamp.

Step 2: If the process of printhead alignment, cleaning, or some other process is performed by your printer, then you have to wait for that process to be finished.

Step 3: On your printer, press the home button. If there is any mistake on the screen, then click Ok and then press the home button.

Step 4: You need to tap the wireless settings after connecting my canon pixma ts6120 printer to Wi-Fit.

Step 5: You must then tap the local area network settings and then tap the local area network settings for the wireless area. You then have to choose simple wireless connection.

Step 6: Now, you have to click yes at the end. Once the printer preparation is finished, a screen will be shown in front of you. Go back to the screen of the installation application and proceed with the installation procedure.

Step 7: You will need to download and operate your setup folder to connect my canon pixma ts6120 printer to Wi-Fi. Read all the directions on how to operate your setup file carefully if the installation does not start automatically. Click the download button after that.

Using CD-ROM for Canon ts6120 setup:

Step 1: Click Start Setup

Step 2: Select the suitable region and then select next.

Step 3: After that you have to choose yes to the license agreement to connect my canon pixma ts6120 printer to Wi-Fi.

Step 4: There will be a study before you. You must either choose to agree or disagree.

Step 5: Click Next, then go to the technique of attachment and choose yes.

Step 6: The installation procedure will proceed after this to connect my canon pixma ts6120 printer to Wi-Fi. If the wireless router screen appears below, press it. To connect to the printer, click on the wireless router. Then enter the password and press the next one.

Step 7: Depending on its network environments and router utilization, the wireless router screen will appear.

Step 8: The setup data will appear before you afterwards.

Step 9: Once the link to the network has been formed, click next.

Step 10: After that, the screen for test print and head alignment will appear. You must follow the directions on the screen to execute the head alignment or test printing.

Step 11: After the setup is finished, click Next.

Step 12: You must select the optional application software after connecting my canon pixma ts6120 printer to Wi-Fi. Click on Next.

Step 13: Click on skip or click on next step.

Step 14: Click exit now.

So, these are some of the measures to connect my pixma canon ts6120 printer to Wi-Fi and canon ts6120 setup.

How Do I Connect Canon Pixma TS6120 Printer to WiFi? Dial +1-877-552-8560 for Canon Pixma TS6120 Wireless Printer Setup and Canon Pixma TS6120 Setup Online.

How to Fix Canon Printer Error Code 1401 ?

Canon Printer Error Code 1401

The Canon Printer Error Code 1401 occurs when one or all of the cartridges installed in the device can not be recognized by the printer machine. These mistakes appear in emails like “Fine cartridge is not installed” for 1401 or fine cartridge for 1687 message is not installed properly.

Although, many of the Canon fine cartridge emails do not imply a customer uses the real Canon cartridges mounted on the device. In addition, consumers can use the remanufactured and correctly refilled cartridges. So, here’s a solution that allows you to solve the Canon printer error code 1401 issue.

This error occurs while the Canon Pixma printer suffers trouble to recognize one or more of the cartridges installed in it. These errors will come up with the following message as “The FINE cartridge is not installed” for 1401, “The FINE cartridge is not installed properly” for 1687 and “Appropriate ink cartridge is not installed” for the 1485 message. Well, several form of Canon FINE cartridges does not always mean that users are working with genuine Canon cartridge installed in the device. Users can further use the printer with an accurate refilled as well as re-manufactured ink cartridges. Our team of experts have found a solution to Fix 1401 Error in Canon inkjet printer with all appropriate steps.

Steps to Fix Canon Printer Error Code 1401 in Canon inkjet printers

Step1: Ensure a proper installation of black and color cartridges

  • Turn on the printer and then, remove both the cartridges to make sure that the one of each cartridge is accurately installed.
  • The printer will need to have both the black and the colored cartridges to be accurately installed to properly print all documents.

Step2: Check for a correct printer cartridges codes:

  • Here, it is advised for users to install cartridge accurately but make sure that it is properly carrying codes machine for the color cartridge. The accuracy of codes depends entirely on the specific printer model.

Step3: Clean up the contacts:

  • The printer contacts are essential for a proper communication with the printer cartridge which is build up with a set of metallic contacts located on the strip to the front of the cartridge. So it is always essential for users to clean all its damaged parts.

Step4: Replace all defective ink cartridge:

  • If the printer is not recognizable then, surely it is defective and needs to be replaced. Replacing all defective ink cartridges will solve this issue.

Step5: Cleaning up all the contacts inside the printer

  • If still the error continue to persists then, it is recommended to clean up all the contacts inside the printer in the same way like you cleaned up the cartridge contacts.

This solution will definitely solve the problem

Dial at Canon Inkjet Printer Support Number +1-877-552-8560 for solving all Canon printer issues


Get in touch at Canon Inkjet Printer Support Number +1-877-552-8560 to resolve such critical issues by contacting our expert technicians. Our team is available 24*7 hours a day to assist customers all day long by delivering them the most optimized answers. Call us now and get your issues solved

How to Setup Canon Pixma MG3022?

Setup Canon Pixma MG3022 Printer

Most of you’ve never performed a Canon Printer cable-free installation. This brief guide will assist you Setup Canon Pixma MG3022 for use on a Wireless LAN. A easy and fast strategy to setting up the printer for use on a Wi-Fi or Wireless network is the cableless installation technique.

This is an simple technique to use when installing for the first time, linking the printer to other pcs on the network, or re-establishing a network link after a shift in router or network.

To set up canon pixma mg3022 and connect to the Windows desktop, merely follow the directions below.

Steps for setting up Canon Pixma MG3022/MG3020 for Wireless LAN use:

Run the setup program and follow the on-screen directions along with the choices needed.

Step 1: Access the page of Setup. Click the Download key to download the configuration file or insert the Setup CD-ROM in the CD Drive of the computer.

Step 2: You will be redirected to a printer setup window that provides you three options:

• Start Setup: the software enables you to use the device from the desktop by selecting this option.

• Useful Software: This option will install the software that makes it easier for you to use the machine.

• Online manual: The internet handbook is available for reference.

• In addition, if you want to complete the process, you can choose the preferred linguistic choice or pick the Exit button.
Use the Start Setup option to jump to the next portion.

Step 3: Next, by choosing the nation or region, you must pick the location of your residence. Then press the button Next.

Step 4: Before installing the Canon product, read carefully the license agreement shown to you, indicating the terms and conditions. If you agree with the agreed agreement, click the Yes button.

Step 5: Next, an sophisticated study program will be shown. Select the button given to Agree or Do Not Agree.

Step 6: Firewall settings will be displayed. This Firewall block can be activated or deactivated in the Windows Firewall feature. Click the Next button here.

Step 7: Next, the name of the connection method with the details of the wireless router used by your printer will be displayed. Also shown in the installation program is the real model series number. Select Yes and proceed to the Connection Method.

Step 8: Now choose the wireless router you want the printer to be connected to. For any chosen router network, you will be shown a list of wireless router, you can enter the Network Key(password). Other wireless networks can also be added manually.

Click the Next button to finish the step.

Note: The attached router screen and its configuration settings are displayed.
Another screen appears until the link to the router is established and finished. Wait for the moment.

Step 9: A “Network Connection Completed” message will be displayed as the printer is attached to the network. Click the choice Next.

Step 10: The printer setup will finally be completed and an option will be displayed to mark the connected printer as the default printer. Click the button Next.

Step 11: You can pick them if you want to pick any required software application(optional). (Defaults, Clear All or checkbox). Click Next and exit.

If you are unable to Setup Canon Pixma MG3022 Printer by Dial +1-877-552-8560 for Canon Pixma MG3022 Wireless Printer Setup and Connect Canon Pixma MG3t022 Printer to Wifi .

How to Connect Canon MF4770N Printer to Computer?

Connect Canon MF4770N Printer to Computer

Canon MF4770N Printer can be connected to the computer system in distinct ways. Depending on your setting and devices, this post list downs three techniques. The user can choose a suitable technique to Connect Canon MF4770N Printer to Computer.

Steps for Canon MF4770N Printer Setup Basic Network Settings:

There are some points to consider when connecting Canon MF4770N Printer to Computer.

• Make sure that the computer and network device setup is completed otherwise you will not be able to use that machine on the network (wired or wireless) even if you are performing correct instructions.

• Your computer or network device design, multiple router features, setting techniques and sophisticated safety configurations differ depending on the environment in which the printer machine is set up.

• Refer to the comprehensive user manual instructions supplied with your network device, or contact the maker directly.

• If you want to use the computer in your office region, contact your network administrator.

• Connect the device to the LAN after confirmation from the network operator in accordance with the two processes mentioned.

Depending on your surroundings and devices, the printer machine can be linked to a wireless LAN or wired LAN. To do this, the link technique must be switched to either wired LAN or wireless LAN (only applicable to MF4890dw / MF4880dw). This printer machine’s default configuration is “Wired LAN.”

1. Option to press the menu.

2. Press Network Settings and click OK.

3. Use numeric buttons to specify the system manager PIN and then click OK.

4. Select Wired / Wireless LAN to change the computer network and then click OK.

5. Also, choose Wired LAN or Wireless LAN, then click OK.

When switching to a wired LAN connection or wireless LAN connection, ensure the following points:

• Deinstall the MF driver once after connecting the wireless LAN or wired LAN.

• Reinstall the MF driver after completion of uninstallation.

• The article then describes how the printer machine can be connected to either wired LAN or wireless LAN.

Method 1: Connecting the machine to the Wired LAN

It is quite clear that you can not simultaneously use wired LAN and wireless LAN. But you should understand that the standard technique of connecting the machine is the “Wired LAN.”

• For connecting the device to a router or network centre, use a LAN cable.

• Wait until the device sets the IP address automatically, which takes about 2 minutes. If necessary, you can set the IP address manually.

• Install the necessary drivers and wait until they are connected to the Wired LAN.

Method 2: Connect the Machine to the Wireless LAN (MF4890dw / MF4880dw Only)

Before linking to the Wireless LAN, make sure your printer device supports wireless connections. You can use the WPS (Wi-Fi Protected Setup) feature to link to the wireless LAN or access point.

Connecting using WPS (Push Button Mode):

To switch the link from Wired LAN to Wireless LAN, remember to follow the fundamental configurations.

• Select the choices in the menu in the following order: Network Settings > > Wireless LAN Settings > > WPS Push button Mode > > Yes

• Hold and click the WPS button for roughly 5 seconds on the wireless LAN router and/or access point.

• The next screen will be displayed for approx. 2 seconds as the wireless LAN router or access point network is identified and the Wi-Fi indicator will blink.

• Wait 2 minutes until the device automatically provides the IP address. You can also set this manually.


• Since the standard connection technique of the device is “Wired LAN,” you must first change the connection technique from “Wired LAN” to “Wireless LAN.”

• Do not attach a LAN cable to your printer device while using a wireless LAN link, as this may result in some malfunctions.

Method 3: Connect Using USB Connection

  • Quickly connect a USB cable to your machine.
  • The USB cable doesn’t come with the machine, you have to buy it separately.
  • Select the specific driver that has to be installed on your computer.
  • Now install the MF Drivers and MF Toolbox.

If you are unable to Connect Canon MF4770N Printer to Computer, just Dial +1-877-552-8560 for Canon MF4770N Wireless Printer Setup and Connect Canon MF4770N Printer to Wifi

How to Setup Canon MG5320 Wireless Printer?

Setup Canon MG5320 Wireless Printer

Preparation for Linking the Multifunction To the Network.

Network Necessities:

Before connecting the machine to the network, make sure the computer and access point or router settings are embedded and the computer is connected to the network.

Wireless Connectivity:

The computer must be connected to the network before creating the machine’s link to the network. Ensure the computer and access point or router settings are incorporated.

Note: It is not viable to have an “Ad-hoc link,” which establishes a direct link to the desktop via a wireless connection without using an access point.

Points Regarding Network Connectivity:

The network device’s settings, router features, configuration configurations, and safety settings vary according to your system environment. Use the instruction manual of your device to create contacts with your supplier for requirements.

Refer to your network administrator in an office setting

If you connect to a network that is not protected by security measures, there is a possibility of disclosing to a mediator data such as your personal facts.

Place the machine and computer on the analogous division of the network.

Drivers & Software Installation:

Software Establishments

To use the machine by connecting to the computer, it is necessary to set up software that includes the drivers to the hard disk of the laptop. It takes about half an hour to set up the operation. (Installation time changes depending on the computer setting or the number of software applications to be set up).

Install the PIXMA MG5320 on your Wireless Network:

If you initially set up your printer on your network, step-by-step wireless setup monitoring will be incorporated into the software installation routine that is shipped with your PIXMA.

Following the insertion into your CD-ROM drive of the Setup CD-ROM that came along with your printer, go ahead with the easy to follow directions. In no moment will you print wirelessly. Use the Connection Method Selection screen to select Wireless Connection.

If you are unable to locate your CD-ROM, you can install the Mini Master Setup MG5300 series, which has the same step-by-step setup procedure as the CD-ROM, by following the following instructions:

• Access the PIXMA MG5320 page.
• Drivers & Downloads click here.
• If the working system of your computer is not immediately identified, select it from the drop-down menu.
• In the Drivers section, right-click Select the Mini Master Setup listing on the correct.
• To save the file to your desktop, select the Download button.
• Upon completion of the setup phase, double-click the file to begin from the download location*. the installation.

If you are unable to Setup Canon MG5320 Wireless Printer, just dial +1-877-552-8560 for Canon MG5320 Wireless Printer Setup and Connect Canon MG5320 Printer to Wifi

How to Fix Canon Printer Error Code c000?

Canon Printer Error Code C000

One of the most frustrating errors since the inhibition of the Canon average device’s range of functions, Canon Printer Error Code c000 indicates that an internal error has aroused with the canon device. However, there are multiple solutions to fix Canon Printer Error Code c800 and its associated devices.

Resolve Canon Printer Error C000

Canon Error Code c000 is a general error message that mainly occurs in a wide range of Canon devices, especially the Canon PIXMA Printer series and other multifunctional devices. Basically, error c300 occurs due to an internal issue that restricts the device from its normal functioning. As the error appears because of an internal reason, the possibilities behind the reason are actually uncertain.

Steps To solve Canon Error Code C000 on Canon PIXMA Printers and Multifunctional Devices?

Follow the below-mentioned effective methods that will help you to fix Error Code c000 on a Canon Printer.  As the reason for the internal issue is unknown, you might need to try multiple methods to troubleshoot the error message effectively.

Method 1: Removing of all packing materials

Sometimes the error c300 code is caused due to not-removed packing materials. So as the printer comes, make sure all the packing materials have been removed from the printer after opening the printer door. Packing materials protective tape and protective polystyrene should be removed from the printer before closing the door. After doing so, check whether the issue still persists or not.

Method 2: Fixing all the ink tanks properly

Another reason that might cause this error to occur is poorly seated or unseated ink tanks. In order to resolve the error, make sure all the ink tanks are properly fixed at their respective places. To do so, open the printer door and check all the ink tanks evenly, and reseated them properly to troubleshoot this error c000.

Method 3: Checking for Empty Ink Cartridges

Many times, canon printers show the error c000 when the ink cartridges are empty. To check for empty ink cartridges, open up your printer and check for all the ink cartridges one by one. If any of them is empty, replace it and check for the issue whether it is resolved or not.

Method 4:  Removing of Foreign Objects and Clearing of the Paper Feed Path

The most general reason for error c000 is a foreign obstruction or paper jam in the paper feed path of the Canon Printer. Make sure your printer is not suffering from any paper jam. Other than that, remove all the foreign objects from the printer to completely clear all the feed paths of your printer. Paper clips and torn pieces of paper can be the cause of this error c000.

If you need any more assistance on how to clear the paper feed path, you can simply contact our Canon Printer Support team to get rid of this error in no time.

Method 5: Resetting of your Canon Device

Related blog How to Fix Canon Printer mp560 Error Code b200?

If none of the above solutions work, resetting your Canon device can be an effective solution to troubleshoot the error code c000. Resetting of Canon device is not a knotty task. Just turn off your printer and detach all the power cords attached with the printer and wait for approximately 5 minutes. After 5 minutes, re-plug all the power cords and turn on your printer and check whether or not you are still facing the error c000.

Call at Canon Printer Support Number +1-877-552-8560 for More Assistance


In case, the issue still persists even after following the above-mentioned steps, please dial up our Canon Printer Support Number for instant hand-to-hand help. They will understand your need and avail help as per your error that has bugged your printer. Any canon printer-related issues; are available 24*7 to help you out in distress.

How to Setup Canon MX450 Wireless Printer?

Setup Canon MX450 Wireless Printer

If you’re wondering how to Setup Canon MX450 Wireless Printer, take a look at the following guide.

Step 1: Connect Preparation

Please make sure your printing device is activated. After the device powers on, the green colored energy button will shine.

Step 2: Setup Canon MX450 Printer

  • On your printing device, press the installation button.
  • Use your printer’s left or right arrow buttons to select device configurations.
  • Pess the OK button.
  • Wireless LAN configuration is selected.
  • Press the OK button again.
  • Select wireless LAN configuration now.
  • Choose Ok now.

Step 3 will switch on the blue-colored Wi-Fi lamp:

Setup process selection The printer will begin searching for the router that promotes Wireless Protected Setup.

Step 4: WPS Push Button Method

  • Click and hold the WPS button on your router. Take a look at your router handbook to understand the information of how to click the WPS button.
  • Press the OK button after two minutes. Your printer’s Wi-Fi light will begin blinking while connecting to the network or while searching for a connecting network.
  • When the left panel opens, press the Ok button.
  • Now click the copy button.

So, that’s how you Setup Canon MX450 Wireless Printer.

If you are unable to Setup Canon MX450 Wireless Printer? Dial +1-877-552-8560 for Canon MX450 Wireless Printer Setup and Connect Canon MX450 Printer to Wifi Online .

How to Setup Canon MX712 Printer?

Connect Canon MX712 Printer to Wifi

Canon PIXMA MX712 All – in-one is a wireless inkjet printer that offers elevated print velocity, quality and enhanced home and office productivity. In addition to the convenience of the user, the MX712 is equipped with a built-in Wi-Fi feature that allows users to easily print from home or office using a compatible computer or mobile device from anywhere. Some excellent characteristics like AirPrint enable wireless printing of papers, pictures, emails, web pages via any iPod touch, iPad or iPhone device compatible.

Additional characteristics such as 35 Duplex Auto Document Feeder, Auto Duplex Printing, and Dual Function Panel are incorporated into the Canon MX712 All-in – One printer to ease multitasking, bringing professional effectiveness and reducing printing expenses.

Steps to Setup Canon MX712 Printer for Windows:

Use the application software or Windows Start menu to open the printer driver setup window.

Using Application Software, open the Printer Driver Setup Window to follow the steps given to configure the printing profile.

1. Use the application software

2. to select the command to print. Click the Print option to open the Print dialog box in the File menu.

3. Choose the name of your model and click on its preferences.

4. The setup window for the printer driver is shown on the screen.

Note: The names of commands or menu names may vary depending on the software you are using.

Open Printer Driver Setup Window Using Start Menu: Follow the directions provided to execute machine maintenance activities such as cleaning print heads or configuring a print profile.

• Select Start menu choices depending on the OS version you have installed: • Select Start menu > > Devices and Printers for Windows 7.

• Choose Start menu > > Control Panel > > Hardware and Sound > > Printers for Windows Vista.

• Choose Start > > Control Panel > > Printers and Other Hardware > > Printers and Faxes for Windows XP.

• Now pick Printing preferences for the chosen printer model from the right-click choices displayed.

Steps to Setup Canon MX712 Printer for Mac:

Follow the steps given to install Canon Printer on your Mac OS X.

Step 1: If you’ve already tried installing the driver, remove it from the preferences / system preferences panel of the printers and fax system. Open Library > > The Canon folder is printed and deleted.

Delete any other documents linked to the Canon printer setup. If you have other Canon printers installed and work on your Mac, make sure that the fresh installation files are selected properly before they are trashed.

Step 2: Empty the folder of garbage before proceeding to the next steps.

Step 3: Unplug the machine of the printer.

Step 4: Download the recent version of the driver and operate the package installer.

Step 5: Select system preferences by pressing the Apple icon at the top right of the screen as the package has been effectively installed.

Step 6: Replug and switch on the printer.

Step 7: Open the preferences for print and fax in the “Print and Fax” section.

Step 8: Click the plus (“+”) on the left side of the window to add a printer. Now in the list should appear the freshly installed printer. Choose the printer you want. Make sure you’ve installed the recent Canon printer version on your recent Mac OS version.

Step 9: Click on the Canon printer model you’ve installed and then click Choose a Driver or Printer Model > > Select Printer Software. Now select your printer from the list shown.

Step 10: Click OK. Now install and work your printer effectively.

Steps For Setup Canon MX712 Printer:

Step 1: Press the Menu button on your Canon PIXMA MX712 printer.

Step 2: Choose Settings and click OK.

Step 3: Select the settings of the device and click OK.

Step 4: Select the configuration of the LAN and click OK.

Step 5: Change the option wireless / wired and click OK.

Step 6: Select active Wireless LAN and click OK.

Step 7: Select configurations for the Wireless LAN and click the OK button.

Step 8: Choose the option to configure WPS and click the OK button.

Step 9: Now select the technique of the push button and click the button OK.

Step 10: Press the OK button on the device as the access point is prepared to work, then press the WPS button on the access point within two minutes.

Step 11: Once the device LCD displays the completion screen, press the OK button. You will be shown the LAN configuration screen.

Step 12: If the setup is not finished within two minutes, a timeout error will be displayed.

Step 13: Depending on the type of access point, the WPS button may have a different name.

Once all these steps have been completed, using a wireless link, you can use PIXMA MX712 to print your office or home employment.

” If you are unable to Setup Canon MX712 Printer , just dial +1-877-552-8560 for Canon MX712 Wireless Printer Setup and Connect Canon MX712 Printer to Wifi Online. “

How to Setup Canon Pixma MX474 Wireless Printer?

Setup Canon Pixma MX474 Wireless Printer

If you’re searching for wireless printer setup instructions for your Canon Pixma MX474, read below. Here you’ll learn how to adjust your printer to the environments of the plant. There are certain access points that are fitted with a WPS button. WPS is a safe Wi-Fi configuration.

This allows devices like PIXMA MX474 to connect to the network without having to put in the password and also offers an easy way to connect the equipment. This is the simplest way to communicate. If you do not have a WPS button on your access point, you can use the conventional technique of attachment provided below for Setup Canon Pixma MX474 Wireless Printer.

WPS Connection Method:

To use the WPS push button method, you need to follow certain circumstances before moving forward.

The access point must have its own WPS button. Please look at the device’s user guide information. If the wi-fi protected installation button is not accessible, the instructions provided in the normal security configuration must be followed.

Using Wi-Fi Protected Access or some other security protocol like WPA2 is essential for your network.

Step 1: To set up canon pixma MX474 wireless printer, click the Setup button on your printer.

Step 2: Use wireless LAN configuration and then pick all right.

Step 3: The WPS setup will be displayed on your printer afterwards. Press the WPS button for the next 3 seconds after reading this message.

Step 4: Keep holding your router’s WPS button now. Read closely the manual that came with your router to get complete information on how to use WPS on your router.

Step 5: After two minutes, press OK on your printer.

The LED light will flash in blue when your printer starts searching for an internet connection. Once the link is formed, the link will appear on the screen. Click OK after that.

If another screen opens, go to the user guide to troubleshoot. So, the WPS operation was all about that. Start installing your PIXMA MX474 software now.

If you don’t have the installation disk that arrived with the printer, you can go to the manuals and software.

If after following the WPS manual, you have to get in contact with the Canon team to get all the help. So, that’s how you set up wireless printer canon pixma MX474.
Standard Connection Procedure:

Install Canon Pixma MX474 Wireless PrinterPress on your printer configuration button.

• Choose the wireless LAN configuration and then click OK. • Press the reset or stop button now.

• The normal setup screen will be displayed after installing the canon pixma MX474 wireless printer. Click all right. Now, all the wireless networks accessible in the neighboring place will be looked for by printer.

• Use your arrow keys to select your network name and twice in a row pick the ok button.

• If you are not sure about the Wi-Fi network, your access point can be viewed by checking the network name on the PC or the linked device.

• If you have trouble locating the network, use the arrow keys to select the network you are searching for. After that, pick the OK button when setting up canon pixma MX474 wireless printer.

• Use the numeric buttons on the screen to enter your wireless network password when the screen opens.

• The printing machine has three modes in total, including the reduced case, upper case and numerical mode.

• Press: A for the uppercase mode,:a for the lowercase mode and the number mode:1 above the display.

• After entering your password, click ok. Then a screen will open and the connection will appear.

• So, the Wi-Fi operation was all about. Now proceed with the installation of the PIXMA MX474 software.

If you are unable to Setup Canon Pixma MX474 Wireless Printer, Dial +1-877-552-8560 for Canon Pixma MX474 Wireless Printer Setup and Connect Canon MX474 Printer to Wifi .

How to Connect Canon MG3050 Printer to WiFi ?

Connect Canon MG3050 Printer to WiFi:

Take a look at the wireless network guidelines on how to connect your Canon printer. There are some access points with a WPS link button already. This allows an person to directly connect the printer to the router without actually entering the password.

This is a very easy and simple way to connect your equipment. There are two methods you can use the WPS technique to connect the device to the wireless network. One is the technique of PIN and the other is the technique of push buttons.

Up to now, the push button technique is the simplest way to Connect Canon MG3050 Printer to WiFi. If your router does not have a WPS button, an alternative solution that can connect the printer to the internet will be accessible.

Canon Printer WPS Connection Method:

Some of the circumstances you need to follow to use the WPS push button procedure before beginning the process.

  • A physical push button is required for the router. For more data, please take a look at the device’s user guide.
  • The WPA2 safety protocol or Wi-Fi protected access should be used by your network. Most access points are unable to link by using the WPS technique if you use wired equivalent privacy safety technique or if you do not use any safety. Take a look at the wireless link settings on your desktop to get data about what sort of safety technique should one use.

Steps You Need to Follow for Complete Setup:

Step 1: Please make sure the wireless router is within your printer range and click the WPS button.

Step 2: Turn on the router and wait for the light to flash by pressing the wireless button.

Step 3: You will need to press the color button after that to connect my canon mg3050 printer to wifi.

Step 4: Until the light turns on, press the wireless button.

Step 5 of WiFi: Press the color button to start flashing the wireless lamp. Then press the wireless button on the router after two minutes. When you search, the blue light of the wi-Fi will blink and the Wi-Fi light and the power light will blink when you connect the access point.

Step 6: when the wireless network and the printer are connected. After that, both the Wi-Fi and the energy light will stay on but will stop flashing. The network light will also switch on after that.

Connect My Connect Canon MG3050 Printer to WiFi Network Settings Confirmation:

You can remove a print from your printer settings to confirm that your printer is linked to the network.

  • Make sure your printer is turned on.
  • Load a sheet of letter size or sizeA-4.
  • Hold the Wi-Fi button and wait until the Wi-Fi light flashes once and then leave the button.

Press the button for color and then press the Wi-Fi button at least twice in a row.

  • You need to press both black and colored buttons to connect my canon mg3050 printer to wifi.

Then the data page for the network will be printed. You must check that the link is active when you go forward to print out. Also check that the correct SSID name is displayed. This was all about the method for setting up WPS.

Standard Connection Method:

If your access point does not support the WPS function, here are some of the instructions to set up your printer.

If you’re a Windows user, you need to run the setup with the installation disk that came with your printer. If you don’t have an installation disk or you’re using a Mac computer, then you just need to download the Mac software. It will look precisely like this when you download the file: win-mg3000-XXX-n mcd.exe.

Connection for Windows Users:

Step 1: Double-click the download.exe file and open the setup screen to begin.

Step 2 : Software and driver updates will be checked by the software. It will take some time to complete this whole procedure.

Step 3: Select your region and nation, then press the next step.

Step 4: Upon connecting my canon mg3050 printer to wifi, read and accept the conditions set out in the license agreement in the next step.

Step 5: If you are interested in participating in the study program, then choose to agree or you may simply choose not to agree.

Step 6: Make sure the block is ticked to deactivate and then proceed to next.

Step 7: If you have a few seconds to check the printer status screen, it will be shown in front.

Step 8: Choose the link to the wireless LAN and pick next.

Step 9: Make sure the printer is switched on and click next.

Step 10: The software will begin to search for the printers on your network.

Step 11: If your printer is connected to the network already. Choose from the list and then choose the next one. The software will be mounted after that.

Step 12: If, for the very first time, you set up your printer, it will not appear on the list. Please ensure that the network link configuration has been selected according to the manual and then pick next.

Step 13: Using the simple wireless connection method, the configuration manual will open and guide you through the steps to connect to the printer.

Step 14: The software will disconnect your wireless network from the computer system after the necessary settings are produced on the printer. Connect your printer to configure your printer settings directly.

Step 15: When the reconecion is complete, your computer will connect to the wireless network once more.

Step 16: Once the network link is established, click next to proceed the process of installing the software to connect my canon mg3050 printer to wifi.

Step 17: You will register and install the driver software on your desktop. It will take a few minutes to finish this process.

Step 18: If you first set up your printer, the print head alignment is required. To start the process, select perform and follow the instructions on the screen closely. Select next if you have already aligned the printhead.

Step 19: To perform a test print, select execute. Once the printing process is effectively finished.

Step 20: Finally, complete the installation process. To view the list of optionally clicked software next.

Step 21: Choose any extra software you want to install and then choose next.

Step 22: When the extra software is installed, a message pops up to assist you set up your tab or software. To obtain more data on how to configure the machine. Now, press next and go on.

Step 23: Click on next if you want to register your printer. If no, you’ll be able to skip.

If you are unable to Connect Canon MG3050 Printer to WiFi, Dial +1-877-552-8560 for Canon MG3050 Wireless Printer Setup and Connect Canon Pixma MG3050 to WiFi .

Call Now ButtonCall Now
error: Content is protected !!